06 mazda 3 steering wheel mods

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93773
Printed Date: May 10, 2025 at 7:07 AM

Topic: 06 mazda 3 steering wheel mods

Posted By: mrcanngo
Subject: 06 mazda 3 steering wheel mods
Date Posted: May 09, 2007 at 9:21 PM

Just wondering if anyone ever tried fabricating any sort of electronics into their steering wheel before. I fabricated some buttons into mine and after finishing i now realize that the wires will get tangled if i try to feed them through the column and turn the wheel.

Has anyone ever attempted this and tried adding something on to it for this to work?

I hope that made sense.

Replies:

Posted By: profuse007
Date Posted: May 11, 2007 at 9:54 AM

for any hard-wiring at the steering wheel, it must go through the reel.

If the reel have extra path, pin the harness and use them, but most likely it does NOT.

btw, wrong forum buddy.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Print Page | Close Window