Print Page | Close Window

remote start not clearing check engine on Chevy

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9379
Printed Date: August 26, 2025 at 5:17 AM


Topic: remote start not clearing check engine on Chevy

Posted By: jdecuir
Subject: remote start not clearing check engine on Chevy
Date Posted: February 11, 2003 at 1:55 PM

1997Chevy Tahoe When remote start feature is used the service engine light does not clear.

when Truck is started by key service engine is cleared .

can you help with some advice please



-------------
J b. DeCuir



Replies:

Posted By: BNLUIS
Date Posted: February 11, 2003 at 2:04 PM

It sounds  like you forgot to connect an extra wire, mainly ignition. Make sure you are have power to this wires. You said that the light doesn't show when car is started with key, so more likely that is the problem.    

   IGNITION|pink                |+  |ignition harness            |
|  SECOND IGNITION|white               |+  |ignition harness            |
|   THIRD IGNITION|pink/white *1  

Notes:
*1 The pink/white does not exist on all models.



-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.




Posted By: JeremyB
Date Posted: February 12, 2003 at 9:08 AM
Sounds like you missed the white wire, sends power to the tranny and sets a lot of codes when it doesn't have power with a hot ignition





Print Page | Close Window