Print Page | Close Window

deterent

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93833
Printed Date: May 08, 2025 at 7:19 PM


Topic: deterent

Posted By: lilspeedy626
Subject: deterent
Date Posted: May 12, 2007 at 12:56 AM

Im getting one of these switches.

https://www.alarmsuperstore.com/accessories/keyswitches/PI-SS-090-1pg[1].pdf

Anyways which wire would i connect this to, starter, ignition, or fuel pump.  For your information I already have a fuel switch install.




Replies:

Posted By: lilspeedy626
Date Posted: May 12, 2007 at 11:07 PM




Posted By: peterubers
Date Posted: May 14, 2007 at 5:35 PM

Don't think I would play around with the fuel pump wires ...

I'd do a stealth install of this switch with starter or ignition wires .. the hardest part would be to install this switch in a way that would prevent someone from ripping it out and twisting the wires from the two terminals on the switch together to complete whatever circuit you are splitting.  You'd basically, I guess, have to install it in a very hidden location -- route the wires under carpet to back seat area? center console arm rest?  Glove box?



-------------
The search function is your friend.





Print Page | Close Window