05 canyon passlock resistance

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93870
Printed Date: May 05, 2024 at 5:46 AM

Topic: 05 canyon passlock resistance

Posted By: nava94
Subject: 05 canyon passlock resistance
Date Posted: May 13, 2007 at 12:33 AM

Hey guys have a 2005 gmc canyon want to put an alarm remote start want to use the relay set up because can't find a bypass module. is the passlock resistance the same for the 04 thru 06? I've checked the resistance from the WHITE/ blue to WHITE/ yellow and it reads 5.47 on my digital meter is this 5400ohm resistor that I need?thanks for the help.

Replies:

Posted By: enice
Date Posted: May 13, 2007 at 8:45 AM

Here is the bypass you need...PASSLOCK-SL2 . You can also use DOC 1603 which can be found in a search on this website.

Posted By: peterubers
Date Posted: May 14, 2007 at 3:37 PM

if the meter is reading in kilo-ohms, then 5.47 is 5400 ohms, yes (looks for the kOhm designation on the DMM)

-------------
The search function is your friend.

Posted By: nava94
Date Posted: May 17, 2007 at 8:13 PM

thanks guys for the info. everything turned out ok with the 2 relay set up, I just left the status output unplugged so it wasn't triggering the second relay but after I plugged it in it started like a champ.thankz again.

Print Page | Close Window