2007 avalon remote start locking problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93898
Printed Date: May 04, 2024 at 9:24 PM
Topic: 2007 avalon remote start locking problem
Posted By: csorb
Subject: 2007 avalon remote start locking problem
Date Posted: May 14, 2007 at 1:48 PM
Installed a Python remote start alarm into a 2007 Avalon.
Once the car is running under remote start, if you unlock the doors, you cannot relock the doors with the new remote once the car has been unlocked. Anybody seen this?
Replies:
Posted By: peterubers
Date Posted: May 14, 2007 at 1:53 PM
which python model
-------------
The search function is your friend.
Posted By: csorb
Date Posted: May 15, 2007 at 10:13 AM
1400
Posted By: Mike M2
Date Posted: May 18, 2007 at 6:34 AM
Are you sure you are using the correct lock wires? | Power Lock | black to brown | - | driver kick, 20 pin plug, pin 9 | | Notes: Meter this wire while turning the key in the driver door key cylinder. | | Power Unlock | gray to purple (double pulse) | - | driver kick, 20 pin plug, pin 19 |
------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: tonyberg
Date Posted: May 18, 2007 at 7:48 AM
If you are using a ground while running output to the keysense wire to disarm factory security, then this is a normal condition...use a FAD pulse and you will disarm the alarm and door locks will function normally
Posted By: Mike M2
Date Posted: May 19, 2007 at 5:55 AM
HUH? no it isn't, the locks will still work on a 1400 if you remote start IF you are using the lock pulses described above. They are not lock switch wires, they are from the drivers key cylinder and still operate the locks. Did one yesterday...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: xtremeaudio
Date Posted: May 19, 2007 at 6:23 AM
new toyota will not let you lock the door with the key in ign with the remote on if you hook up keysense wire body control thing the key it in ign that y you can lock the door i hope this work for you if yet let me know
Posted By: Mike M2
Date Posted: May 19, 2007 at 3:02 PM
That's only the factory remote. Aftermarket keyless entry will still work...
-------------
Mike M2
Tech Manager
CS Dealer Services
|