will broken led circuit stop the alarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94005
Printed Date: May 14, 2025 at 11:24 PM

Topic: will broken led circuit stop the alarm?

Posted By: stinkyfatpig
Subject: will broken led circuit stop the alarm?
Date Posted: May 17, 2007 at 1:44 PM

basicly i bought a new truck and it has an ungo alarm. but when the last guy was taking out his stereo he didnt hook the LEDS back up.. now the alarm isnt working.. I had some trouble finding the wiring for the LEDS.. should it work again once i get the LEDS back in..

and what does the over ride switch do? I need to find a manual for this thing.

Replies:

Posted By: Big Dog
Date Posted: May 17, 2007 at 2:29 PM

Without the LED's you wouldn't know what the state of your security system is in but it wouldn't impede the system from functionning correctly.

Make sure that the LED voltage corresponds to the security system. Most security systems use 2 volt LEDs.

You're dead on when you said you need a manual. Get all the numbers you can from the module in the car as well as your remote especially the FCC ID, which can sometimes be molded into the casing rather than being a sticker, and we'll help you find what you need.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: stinkyfatpig
Date Posted: May 17, 2007 at 3:08 PM

my fcc number is

mp62zuungo0701-702

ill get the numbers off the unit