07 silverado 1500 clifford prime level4

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94018
Printed Date: May 15, 2025 at 2:26 AM

Topic: 07 silverado 1500 clifford prime level4

Posted By: SoCalVWs
Subject: 07 silverado 1500 clifford prime level4
Date Posted: May 17, 2007 at 9:50 PM

I just bought a 2007 Chevy Silverado 1500 Crew Cab (not the Silverado Classic) and would like to install my Clifford Alarm. It's a 2001 Model Clifford Prime Level Four with the G4 Technology. I need all wiring information pertaining to this truck for using my alarm. Things I might also need to know are:

1) Do I need to diode isolate the door triggers?
2) Are there any modules I need to purchase to make this alarm work with my truck?
3) Any tricks or special wiring needed for the starter wire or any other circuits?

Thanks for your help!

Tim

Replies:

Posted By: Big Dog
Date Posted: May 18, 2007 at 3:20 PM

I put it here: 2007 GMC PICK-UP

The OM-GMC-7 handles the immobilizer plus the required resistors for remote starting.

The 1701G1 DATA module from DEI will handle Lock/Unlock, Driver's Priority Unlock, OEM Security Alarm Arm/Disarm, Data to Analogue Door Trigger Output (-)

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: SoCalVWs
Date Posted: May 18, 2007 at 6:07 PM

Thanks! Do you happen to have the diagram it tells me to refer to?

Posted By: SoCalVWs
Date Posted: May 20, 2007 at 1:56 AM

Where can I buy these modules?

OM-GMC-7
1701-G1

Posted By: Big Dog
Date Posted: May 22, 2007 at 7:45 AM

Diagram: 2007 GMC-Supplement

Where to get modules? You'll have to Google it 'cause I'm from Canada, eh.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: SoCalVWs
Date Posted: May 22, 2007 at 12:34 PM

Thanks!!