mazda 3 adding doorlock actualtors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94037
Printed Date: May 16, 2024 at 10:53 PM

Topic: mazda 3 adding doorlock actualtors

Posted By: gags
Subject: mazda 3 adding doorlock actualtors
Date Posted: May 18, 2007 at 2:00 PM

Working on a 2006 Mazda 3 very base model with no power options.

Want to add doorlock actuators in each door ( for keyless entry) but having problems with the install :

1.) vehicle has a cable mech that locks and un-locks vs. typical metal rods.

2.) mounting an actuator interferes with putting back the door panel.

Does anyone else have experience with this type of installation?

Replies:

Posted By: Big Dog
Date Posted: May 18, 2007 at 2:34 PM

If you already have the actuators then DEI sells the 524CL cable lock kit, around 15 bucks U.S. Google it.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: gags
Date Posted: May 20, 2007 at 3:34 PM

Thanx, I will check that out.

The size of the actuators are also a problem.

Can't seem to position them anywhere where it will not interfere with the door panel being put back on.

Posted By: jhinson
Date Posted: May 21, 2007 at 3:41 PM

remove foam on back of door panel, then you will have lots of room

Print Page | Close Window