hi i just got a directed 1700g gm databus interface moudule for the silverado 2003 , but i have a trouble i hookit up and the door locks are working but in reverse wheni press lock on the alarm control the truck unlocks and when i press unlock in the remote the truck locks and the horn sound three times what i am doing wrong can you help me ?
i hook up the folowing
red to 12v constant
black to chasis ground
brown white i didnt hookit up
green /black to alarm lock
violet/black to lt green on ign harness
blue black to unlock from the alarm
RED / white i didnt hookit up
green to negative door triger on the alarm
gray/black i didnt hookit up
ligth blue toalarm un lock
blue to ground when armed of the alarm (orange wire)
purple to obd conector
the remote start is working ok the trouble i have is with the locks
you may want to reverse wire GREEN/ black and blue/black to your alarm
The blue wire is connected incorrectly. The blue wire needs to connect to the ground while running wire. On DEI alarm it usually is a blue wire coming out of the relay pack or a blue/white wire coming from the brain that is also a status output. Also you cant use the unlock wire twice on your alarm. You can use the unlock wire on the blue/black wire and use your "second unlock" wire on the light blue wire. This will give you priority unlocking(first pulse just unlocks driver door and second will unlock all)