Print Page | Close Window

cliffnet wizard g4

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94077
Printed Date: May 13, 2025 at 3:17 PM


Topic: cliffnet wizard g4

Posted By: derrickg
Subject: cliffnet wizard g4
Date Posted: May 20, 2007 at 7:01 AM

i wanted to know if you can use cliffnet wizard pro g4 on a g5 product.



Replies:

Posted By: ringojam
Date Posted: May 26, 2007 at 8:47 PM
Yes you can no problem..

-------------
Jamaica home of the worlds fastest man.



Posted By: howie ll
Date Posted: May 28, 2007 at 4:45 AM

Except I/Start V where early batches glitch the software and you will come out with all your aux remote settings changed, passive arming etc. I only used Wiz for the following:- Change Siren sounds, change remote parameters, change valet code, change starter crank time. The problem seems to occur when you select "learn TACH".




Posted By: nathanvtr
Date Posted: August 01, 2007 at 4:16 PM
I'm trying to get a hold of the original G4 software as the G5 software has messed up my concept 300 settings do any of you guys have it and would you be willing to email me a copy?



Posted By: ringojam
Date Posted: August 01, 2007 at 8:56 PM
I think i have a g4 cd will check tommorrow but how do i email soft ware over the net? if i have a copy i can burn it and mail it to you if you like.

-------------
Jamaica home of the worlds fastest man.



Posted By: ringojam
Date Posted: August 01, 2007 at 8:56 PM
My email is ringojam@hotmail .com

-------------
Jamaica home of the worlds fastest man.


Print Page | Close Window