2 led’s on 1 alarm?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94134
Printed Date: May 07, 2025 at 3:14 AM

Topic: 2 led’s on 1 alarm?

Posted By: slamdaccord
Subject: 2 led’s on 1 alarm?
Date Posted: May 21, 2007 at 9:47 PM

ive seen this done a lot and i used to know how to do this a while back....i have a blue led that flashes for my python alarm...its mounted in my a-pillar...i wanted to put another one on the passenger a-pillar...do i just tag into the same RED / blue wires off the one that is in there now? or someone else told me i have to switch the wires and put red to blue, blue to red so it flashes the same

Replies:

Posted By: gtchida
Date Posted: May 22, 2007 at 12:04 AM

Yes, you will want to wire the led's in series (positive to negative).

Gary

Print Page | Close Window