Print Page | Close Window

programming aps996a transmitter

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94178
Printed Date: May 12, 2025 at 7:36 AM


Topic: programming aps996a transmitter

Posted By: GZus
Subject: programming aps996a transmitter
Date Posted: May 23, 2007 at 10:12 AM

Could someone tell me how to program these transmitters.  Thank You

-------------
G



Replies:

Posted By: pitoaudiovisual
Date Posted: May 25, 2007 at 10:01 PM

Enter the car, turn ignition switch to the on position. press and release the valet button 3 times. the dash led will flash 1, and the siren will chirp 1 indicating the alarm is ready to accept programming of channel 1 which is lock and 2 unlock, and panic functions. press and hold the lock or unlock butoon that you want to program for 4 seconds or until you hear and long chirp. if the transmitter button has lock and unlock on one button, press and release the valet button switch 2 times . 

basically turn the ignition on and press the valet button 3 times when you hear the long chirp press lock and it should be programmed .. let me know if you need more help



-------------
Confidence is the key to any project!!


Print Page | Close Window