viper 791xv starter kill

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94196
Printed Date: May 07, 2025 at 2:24 PM

Topic: viper 791xv starter kill

Posted By: thardy01
Subject: viper 791xv starter kill
Date Posted: May 23, 2007 at 8:46 PM

How do i wire the 791xv for starter interupt in a 1997 ford explorer

-------------
mike2288

Replies:

Posted By: captainzab
Date Posted: May 23, 2007 at 9:20 PM

97 ford explorer
Find the STARTER wire RED / LIGHT BLUE (+) at the IGNITION SWITCH HARNESS and Cut it in half

On the 791xv XCRS relay pack, the purple wire goes to the starter (engine side) of the starter wire that you cut in half. The Green wire of the XCRS goes to the other side of the starter wire (key side).

The starter kill is built into the relay packet, it also acts as an antigrind protection

-------------
Note: You Always Dont Get What You Pay For.

Print Page | Close Window