compustar jumper setting

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94231
Printed Date: May 02, 2024 at 1:05 PM

Topic: compustar jumper setting

Posted By: sach_deva
Subject: compustar jumper setting
Date Posted: May 25, 2007 at 3:47 AM

Hi!,

My buddy and I were discussing the negative aspects of not cutting the jumper of the alarm brain on a automatic car. What would happen if the jumper wasn't cut and the car was started?

Replies:

Posted By: tonyberg
Date Posted: May 25, 2007 at 8:01 AM

you would have to go thru the manual tranny sequence of setting the ebrake and what not to get the car to remote start...a headache that you would give yourself why?

Posted By: dswift
Date Posted: May 25, 2007 at 4:04 PM

I think he was asking a different question,

What would happen is that the car will NOT start if you cut the jumper. You will get a error code of three flashes and then 7 following the three. Which means your not in reservation mode. Doesn't matter if your in a automatic. Its a pretty smart control module.

-------------
"dont ground out!"

Print Page | Close Window