1992 toyota soarer alarm colour codes

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94289
Printed Date: October 04, 2025 at 10:56 AM

Topic: 1992 toyota soarer alarm colour codes

Posted By: sach_deva
Subject: 1992 toyota soarer alarm colour codes
Date Posted: May 27, 2007 at 6:22 PM

Hi!,

I am trying to wire a compustar 2was 8000 alarm in a 1992 Toyota Soarer (same body style as a 1992 Lexus SC400). The car has a inline 6 cylinder with a twin turbo instead of a 4.0L V8. I would like to know the wire colour codes for the car, and I am having extreme difficulty finding the tach wire. Any help would be appreciated.

Replies:

Posted By: ringojam
Date Posted: May 27, 2007 at 7:54 PM

You can test at the dagonostic port i know the jdm models you can get a good signal at the port, if all else fails use an injector wire. posted_image

-------------
Jamaica home of the worlds fastest man.

Posted By: howie ll
Date Posted: May 28, 2007 at 4:33 AM

There is a box in engine bay from where leads go to injector ports. open up and you will find one of the cables is excessively long. That is your tach lead. If it has a coil, go to the - side, if it has an OBD socket, look for a black able with silver dots, failing all of the above (which apply to IS 200/300, GS 300) go to rear of tach. Tach terminal = Ign, lights, ground and RPM

Print Page | Close Window