activate 450t with unlock output

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94321
Printed Date: July 05, 2025 at 2:45 AM

Topic: activate 450t with unlock output

Posted By: megatfauzi76
Subject: activate 450t with unlock output
Date Posted: May 28, 2007 at 10:50 PM

Hai..

Anyone think this is imposibble to be done? Activate the 450T using output from UNLOCK wire..

Once press Unlock Button - Unlock the car ( Activate Channel 1)

Twice press Unlock Button-Activate Channel 2

3 times press Unlock Button-Activate Channel 3

4 times press Unlock button-Activate Channel 4

and so on....

Anyone think its possible to be done? Coz my alarm dont have any auxilary output? Really need advise...Coz plan to put autostart and window module..

Thanks

Replies:

Posted By: enice
Date Posted: May 28, 2007 at 11:49 PM

Seems like the only thing that would work for remote start would be a double lock pulse and thats it for your alarm.(to activate remote start you wold press the button twice) As for adding a remote start you can go with a combo alarm/remote start that has additional channels and not worry about that anymore

Print Page | Close Window