Print Page | Close Window

alarm wiring renault megane 05

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94348
Printed Date: June 20, 2025 at 5:51 PM


Topic: alarm wiring renault megane 05

Posted By: chowwie
Subject: alarm wiring renault megane 05
Date Posted: May 29, 2007 at 4:32 PM

hi i have an renault megane 05 reg and have fitted a cobra 3193 alarm to it which all works fine but i need it to put the windows up on arming.

i have located a wire in the cars control box which is grey  PE2 socket TRACK 7 which is called (one touch electric window wire) according to wiring diagram of car

problem is i cant get it to work from this wire

i have tried direct negative feed to this wire and nothing happens but if i manually pulse it by dabbing a negative to the wire all the windows close.

i cant use a pulsing relay as the grey wire seems to have no sequence as i tried 1 second on 1 second off 3 0r 4 times then tried 2 seconds on 2 seconds off   and nothing

just seems to work when it feels like when i dab a negative to it

if anyone understands this and knows anything at all about my problem then please help

there must be some smart a*se out there ;)

email chowwie@hotmail.co.uk




Replies:

Posted By: howie ll
Date Posted: June 03, 2007 at 8:08 AM
This is a nasty car, use the factory remote to close the windows, I think it only does the drivers! Otherwise you are going to have to get into driver's door and play with switches. Based on previous Rens passenger is neg. at rest and drivers is pos at rest!



Posted By: chowwie
Date Posted: June 03, 2007 at 3:03 PM
many thanks i have given up now anyway


Print Page | Close Window