04 buick rainier rs and memory seat
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94359
Printed Date: July 07, 2025 at 11:32 AM
Topic: 04 buick rainier rs and memory seat
Posted By: rudydapimp
Subject: 04 buick rainier rs and memory seat
Date Posted: May 29, 2007 at 10:28 PM
Gonna be doing one for a friend here in the next few months. He was kinda stuck on using the factory remotes, but he doesnt have too. How Can i wire it up so it works like the factory remotes? each remote has the signal for the memory seat for each user. Are there any units (DEI) that I can do this easily with? and was planning on using the XK01 from bypasskit for all the data functions and the passlock as well. Any help will be greatly appreciated
Rudy
Replies:
Posted By: Chris Luongo
Date Posted: May 30, 2007 at 7:11 AM
XK01, or GM-DLBP will make ALL aftermarket remotes act as Driver 1. As far as I know, all the other brands of databus modules do the same thing too.
The simplest thing would just be to have the secondary driver (#2) press the 2 button the door when entering the car.
If he really, really needs to have the two separate driver settings, you could always put in a simple 1-button remote start, and have him keep the factory remotes for the locks.
Posted By: BNLUIS
Date Posted: May 30, 2007 at 9:35 AM
Well if the remote starter unit you are using has additional channels and the Remotes can be configured to specific driver then this is the part you will use. https://ifar.ca/en/products/bypass_kits/gm-sl2i/?year=2004&make=65&model=2943#description https://ifar.ca/download.php?productmanualid=499&key=cb41f5394001a5eb9d4c876cd5376c8e ------------- Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Posted By: rudydapimp
Date Posted: May 30, 2007 at 3:29 PM
thanks for the replies so far boys. appreciate it. I can take care of the channels part, but how would you wire them up for a specific driver????
|