Print Page | Close Window

reservation mode

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94443
Printed Date: September 14, 2025 at 3:40 AM


Topic: reservation mode

Posted By: aesm78
Subject: reservation mode
Date Posted: June 01, 2007 at 1:42 PM

Quick question, how does one enable the "reservation mode" on a Aftermarket Generation alarm? Their website and manual aren't that much help. https://aftermarketgeneration.com/catalog/product_info.php?cPath=23_28&products_id=32

I installed this alarm on my car and I was trying to use the remote start feature but I can't get it to work. After reading the manual I found a slight note that indicates that I have to enable "Reservation Mode" but the manual does not tell you how to do this.

Aftermarket Generation
model: AGA1210

Under Remote Engine Start

NOTES*

"3. For manual transmission vehicles, only when you've been setting the
reservation mode, you can start your vehicle"

Your help is greatly appreciated,




Replies:

Posted By: KarTuneMan
Date Posted: June 01, 2007 at 2:16 PM

Normally you go thru a sequence of setting the ebrake, with the foot brake shut off the key (vehicle stays running) get out close the door, the rig shuts off.

This is reservation mode. The remte start knows the rig is in nott is gear. If you open the door with out remote starting, the sequence is broken, and it will

NOT remote start.   That web site is LAME.



-------------


Print Page | Close Window