dei python 990 sst

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94553
Printed Date: May 15, 2025 at 11:27 AM

Topic: dei python 990 sst

Posted By: ciaksaiong
Subject: dei python 990 sst
Date Posted: June 06, 2007 at 3:14 AM

I have just installed dei python 990sst in my car.. the problem is ...

my transmitter doesnt notify me when the alarm is triggering even when i am just beside the car.. but when i disarm it does let me know the alarm was triggered.. n i do get confirmation when i arm n disarm its just that the alarm doesnt automatically send out notifications when the alarm is triggered .. wat would be the most likely cause of this problem?

Hope u guys can help me.. thanx a million

Replies:

Posted By: captainzab
Date Posted: June 06, 2007 at 12:30 PM

Customer had a problem like this, i swapped out the remote. (LCD version from DEI, but non SST)
Should be the same reason.

-------------
Note: You Always Dont Get What You Pay For.

Posted By: altytruck
Date Posted: June 06, 2007 at 2:23 PM

sounds the remote is sleeping. easy way to tell is to wait 10-15 seconds on a sst remote and you will see a rx flash at the top of the lcd above the lock/unlock icon. If not its sleeping. Easy to fix. Flip over remote press and hold program buttom until you hear one long beep. within 5 seconds press the (*) button and it should turn it on. To exit wait 5 seconds should here two short beeps. Now look at remote and within 10-15 seconds it should show the rx button which lets you know its awake. arm system set it off and it should give confirmation

Posted By: ciaksaiong
Date Posted: June 06, 2007 at 7:43 PM

thanks guys .. will try it later n let u guys know hope it works

Posted By: ciaksaiong
Date Posted: June 07, 2007 at 12:49 PM

u r right it was in sleep mode.. it working well now.. thanx every1 for your help.. my bad