92 dakota lock wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94592
Printed Date: May 14, 2025 at 7:35 AM

Topic: 92 dakota lock wiring

Posted By: dlek
Subject: 92 dakota lock wiring
Date Posted: June 07, 2007 at 3:26 PM

I have been trying to connect a keyless to a 92 Dodge Dakota. The lock switch has a constant 12 feed for locks from fuse box. also, It has an orange(+lock) and pink (+unlock). There are also 2 black wires which seem to remain grounded.

As the pink and orange read + when unlocked and locked, respectivly, they are ground when the switch is in neutral position. Simply bridging 12v to one of these wires would blow the fuse. The system does not appear to use relays. Are there relays somewhere else in the vehicle?

How could I go about adding relays for lock and unlock functions?

Replies:

Posted By: rudydapimp
Date Posted: June 07, 2007 at 5:10 PM

the lock and unlock wires are ORANGE / purple and pink/purple respectively. in drivers kick, behind fuse box. you need to 5 wire relays in to make the keyless entry work.

https://www.the12volt.com/doorlocks/page3.asp#5w

Posted By: dlek
Date Posted: June 07, 2007 at 11:01 PM

Thanks for the help! I never saw any ORANGE / purple and pink/purple like the wiring info specified, but I did not actually remove the fusebox to look. Thanks alot!