99 dodge durango, door trigger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94615
Printed Date: May 09, 2025 at 9:11 PM

Topic: 99 dodge durango, door trigger

Posted By: cuttdawg85
Subject: 99 dodge durango, door trigger
Date Posted: June 08, 2007 at 1:16 AM

Just got done installing a AutoCommand 2-Way Remote Start,Alarm. Everything works great except i get a extra chirp when arming. As it is seeing a door open. I got the dorr trigger wires in the kick panel, and the domelight supervison hooked up to the courtsey light under the drivers dash. The dome light stays on after i arm, Any reason why? Im thinking this is why im getting the extra chirp. Any ideas? Thanks in advance.

Replies:

Posted By: slicksam
Date Posted: June 08, 2007 at 4:49 AM

the door triggers are on a black plug left side of the brake pedal.

BLACK/ blue = drivers door

tan/red = for all other doors

tan/black = for the hatch

-------------
Testing is the key

Posted By: cuttdawg85
Date Posted: June 08, 2007 at 2:02 PM

i have the door trigger hooked to the BLACK/ blue. I stll have to diode isolate and hook up the other three doors. Should it be ok to use the courtesy light to trigger the domelight supervision? If not where is the best place for it? Thanks.

Posted By: enice
Date Posted: June 08, 2007 at 3:29 PM

Use those 2 wire and diode isolate. After connecting the 2 it will control all doors. If im not mistaken it is the green wire from the autocommand that is the negative door trigger. Disconnect the BLACK/ white wire and see if after locking they shut off.

Print Page | Close Window