valet551r replacement

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94678
Printed Date: May 14, 2025 at 8:21 PM

Topic: valet551r replacement

Posted By: scoopdee
Subject: valet551r replacement
Date Posted: June 10, 2007 at 10:32 PM

I have a valet551r in my 96 accord and they since then they upgrade to a valet 561. i was wondering if i have to uninstall the old one to put in the 561? or can i just change out the module and use the conncetor from the 551? since the 561 is and upgrade to the discontinued 551

Replies:

Posted By: cmk0808ny
Date Posted: June 11, 2007 at 6:15 AM

you need to take the 551 out and rewire the 561

Posted By: scoopdee
Date Posted: June 12, 2007 at 5:09 AM

Thanks for letting me know I hoping i didn't have to. It would seem to me that it would more of an advantage for the company to make it easier just to change out modules or something where you don't have to do a complete reinstall (especially if it's just an improvement of a older model), rather than do a whole new install because now that give a person switch to another brand if the do choose too.

Thanks for the reply

Posted By: cmk0808ny
Date Posted: June 12, 2007 at 6:19 AM

i would put a valet 562t in and you can upgrade later on without needing to rewire. just swap modules and antenna. Then youre done.

Print Page | Close Window