Print Page | Close Window

507m wiring to 5900 optional sensor 2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94703
Printed Date: May 16, 2024 at 8:12 PM


Topic: 507m wiring to 5900 optional sensor 2

Posted By: vsme
Subject: 507m wiring to 5900 optional sensor 2
Date Posted: June 11, 2007 at 8:40 PM

I am trying to use the sensor 2 output on my alarm for the tilt sensor

Viper 5900

[url=https://imageshack.us][img]https://img520.imageshack.us/img520/8504/deidy8.png[/img][/url]

:thumbup:




Replies:

Posted By: vsme
Date Posted: June 12, 2007 at 2:39 PM
posted_image



Posted By: JWorm
Date Posted: June 12, 2007 at 4:35 PM
Blue of tilt sensor to green of shock sensor harness
red of tilt sensor to red on alarm (the wire with the 15 amp fuse)
orange of tilt sensor to orange ground when armed of alarm (the orange wire in the same harness as the above red wire)



Posted By: vsme
Date Posted: June 12, 2007 at 5:02 PM

Orange and Red 12 V I understand but

but where does the blue wire get connected to

1. Do I attach the blue wire to the green loose wire coming from the alarm side?  or

2. Do I cut the green loop and attach the blue wire coming from the harness side?




Posted By: captainzab
Date Posted: June 12, 2007 at 10:06 PM
On the shocksensor harness, the loopside goes to the shocksensor
The green loose wire is your trigger wire, this goes to the tilt sensor and plugs to the brain

-------------
Note: You Always Dont Get What You Pay For.



Posted By: vsme
Date Posted: June 13, 2007 at 12:11 PM

captainzab wrote:
On the shocksensor harness, the loopside goes to the shocksensor
The green loose wire is your trigger wire, this goes to the tilt sensor and plugs to the brain

So the the green loop on the shock sensor side stays looped?

Also now the warn away trigger on my shock sensor doesn't work and the tilt sensor is not even connected to the green loop or anything.... Its the way it was orginally like in the picture




Posted By: vsme
Date Posted: June 13, 2007 at 1:26 PM

thanks alot caption, I got the tilt sensor to work as sensor 2

I also had my shock sensor backwards thats why it wasn't giving warn away alerts 


Print Page | Close Window