Print Page | Close Window

camry keyless wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94854
Printed Date: July 18, 2025 at 6:27 PM


Topic: camry keyless wiring

Posted By: atoya
Subject: camry keyless wiring
Date Posted: June 16, 2007 at 5:18 PM

I am installing 1 pursuit keyless entry in my 1996 camry

I need a constant 12V input for the module. All wiring diagrams indicate it to be in the ignition harness.

I am not sure how to access this harness it should be behind the dash somewhere

..Is there another location for a constant 12V

I tested the module by directly connecting to the + terminal and everything works fine..

Please help..!!

Thanks




Replies:

Posted By: KarTuneMan
Date Posted: June 16, 2007 at 5:29 PM
Drop the bottom of the dash down..... you'll be glad you did. This car is a good one to "learn on"...... IF your new to the 12 volt arena

-------------



Posted By: atoya
Date Posted: June 16, 2007 at 5:41 PM

Thanks for the quick reply.

I looked at the bottom dash and I see 2 10MM bolts one on each side.

I loosened these but it looks like the dash still doesnt come off. Have I missed something here?

Thanks




Posted By: Chris Luongo
Date Posted: June 17, 2007 at 12:40 AM
Should be, on that same panel, two little pieces near the top......one rectangular, one square.......pop those off, and there are two more 10mm bolts behind. After that, the lower dash will come right off.



Posted By: atoya
Date Posted: June 17, 2007 at 12:21 PM

Thanks Chris...Worked perfectly..

appreciate your help..


Print Page | Close Window