1999 lincoln navigator rsx 3.5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94915
Printed Date: May 16, 2024 at 4:37 AM

Topic: 1999 lincoln navigator rsx 3.5

Posted By: mortarb2
Subject: 1999 lincoln navigator rsx 3.5
Date Posted: June 18, 2007 at 10:05 PM

Ok, so again I am coming to the gods of wiring for help. I am in search of a door trigger switch wire. Supposedly it is light blue and white and on the keyless module? I have tapped every wire that is blue and white. The right one would show no current door closed current door opened right? All I am getting is full current through every wire... Any ideas?

Replies:

Posted By: peterubers
Date Posted: June 18, 2007 at 10:11 PM

LIGHT BLUE/WHITE

(-)

PIN#11 KEYLESS MODULE

This is the all-door trigger.

you don't mean current/amperage, you mean voltage. The appropriate lt.blue/white wire will show 5->12 volts when all doors are closed and 0vdc (or ground) when any of the doors are open.

what do you mean by, "All I am getting is full 'current' through every wire." Through every wire during what situations: door open/closed? Full 'current'?? You mean 12 volts? posted_image

-------------
The search function is your friend.

Print Page | Close Window