prestige 786 bypass wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94925
Printed Date: May 02, 2024 at 10:34 PM

Topic: prestige 786 bypass wire?

Posted By: illusionaudio
Subject: prestige 786 bypass wire?
Date Posted: June 19, 2007 at 9:03 AM

What wire do you use to power upm a dei 555g bypass? I have the bypass grounded out and it works but I cant figure out which wire off of the alarm will power it up. There are four wires which are supposed to provide ground at different times but none of them will activate the bypass. I ran a relay off of one of the ignition wires to power up the bypass and it starts but the security light comes on until you put the key in.

Replies:

Posted By: Chris Luongo
Date Posted: June 19, 2007 at 9:04 AM

Light blue, Ignition 3, in the big plug with all the parking/brake/door trigger wires.

The light blue wire makes a ground whenever the remote starter is on.

Posted By: illusionaudio
Date Posted: June 19, 2007 at 9:10 AM

Thanks I appreciate it. Any idea which where to locate the horn wire? It is on a 2002 rendezvous

Posted By: installmarc
Date Posted: June 19, 2007 at 11:13 AM

steering column or bcm

Posted By: cneubert42
Date Posted: June 19, 2007 at 2:03 PM

I believe it is in the airbag harness on that vehicle.

Print Page | Close Window