Print Page | Close Window

normally open switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95057
Printed Date: May 15, 2024 at 4:22 PM


Topic: normally open switch

Posted By: dea,can
Subject: normally open switch
Date Posted: June 23, 2007 at 12:04 PM

need to know how to wire a normally open switch its for onboard honda 12volts.its power vacuum machine so when cutter door is open kills the motor.

the switch has 4 contacts 1 ,2  pins are n/o and pins 3,4 are for n/c  the wire says n/o wiring.



-------------
dragon



Replies:

Posted By: peterubers
Date Posted: June 23, 2007 at 5:27 PM
Could you clarify a little more what exactly it is you are installing, and what you want to accomplish with the wiring, thanks.

-------------
The search function is your friend.



Posted By: KarTuneMan
Date Posted: June 23, 2007 at 5:36 PM
dea,can    PM  hotwaterwizard.

-------------



Posted By: dea,can
Date Posted: June 23, 2007 at 5:55 PM
its a momentary switch   for engine safety shut down  i will take a pic later at work

-------------
dragon



Posted By: dea,can
Date Posted: June 24, 2007 at 2:44 AM
posted_imagethats the switch so switch works off the ign so when  the machine is running the switch is pushed in and when the switch is open it stalls the engine .for safety

-------------
dragon


Print Page | Close Window