2 window modules, 1 for up, 1 for down
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95123
Printed Date: April 28, 2024 at 4:16 PM
Topic: 2 window modules, 1 for up, 1 for down
Posted By: mustang_pumpin
Subject: 2 window modules, 1 for up, 1 for down
Date Posted: June 25, 2007 at 11:49 PM
Ok originally i was planning on installing 1 window rollup module but now i decided i would rather have 2 installed, 1 for up and one for down control!!! so my question is how do i go about wiring the 2 so when arming the system the one rolls windows up and upon disarming the other rolls the windows down?? any help would be great... detailed diagrams would be even better though!!! so if anyone has any info or tips on doing this please reply asap!!! thanks alot
Replies:
Posted By: JWorm
Date Posted: June 26, 2007 at 8:17 AM
How many windows?
Posted By: rbimdxe
Date Posted: June 28, 2007 at 7:58 PM
So... what happens when its wizing down rain, and you have to go out somewhere? *beep beep*..Oh doodie, the windows are going down...
Posted By: mikvot
Date Posted: June 28, 2007 at 8:06 PM
I would hook the "up" to the ground when armed wire...this would roll the windows up when you arm the system,and i would hook up "down" to an aux channel. That way you could roll the windows down only when you want, for the reason rbimdxe mentioned above. Or, even better, if you have 2 aux. channels, use 1 for up, and the other for down......i always have my dogs with me, so this is the option that works best for me....don't have to worry about my dogs getting caught in a window.
-------------
Posted By: mustang_pumpin
Date Posted: July 02, 2007 at 12:08 AM
JWorm] wrote:
ow many windows?
i have a 2001 mustang so only 2 windows
Posted By: phonymike
Date Posted: July 02, 2007 at 4:16 AM
I got a DEI 530T, it controls 2 windows both up and down. the "ground when armed" output from my viper goes to the "roll both windows up" wire while and aux channel on the alarm goes to the "roll both windows down" wire. this module also has "1 touch" feature meaning I could just tap into each window switch (with a relay to reverse the polarity) if I wanted to control each window individually via remote. it just depends on what module you got, but pry just tie both the "windows up" wires together to your "ground when armed" wire on alarm, and both "windows down" wires to the aux wire on alarm.
Posted By: mustang_pumpin
Date Posted: July 02, 2007 at 6:38 PM
thanks for the info.... i think im not even gonna waste my time and energy on trying to figure out how to hook up the modules i have... im gonna just buy the DEI 530T Window Automation System!! seems like it is much easier to hook up and has all the options and everything all in the one module so im gonna go with that!!! :) :)
|