remote start clifford matrix 50.5x
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95255
Printed Date: September 10, 2025 at 5:33 PM
Topic: remote start clifford matrix 50.5x
Posted By: runforfuncc
Subject: remote start clifford matrix 50.5x
Date Posted: July 01, 2007 at 3:59 PM
I have a 2006 Hyundai Sonata that I am installing a Clifford Matrix 50.5x in. Everything works fine (door lock, unlock, truck release. etc) except when I double press the remote start button on my remote, nothing happens. No relays click, and the transmitter doesnt beep at me to either tell me its remote started or that it didnt recieve the transmission. I have connected the neutral safety switch (BLACK/ white) as well as the remote start activation input (WHITE/ blue) to a ground. Is there something Im missing? Anyone have any suggestions? I havent connected my second ignition, which I will, but wouldnt it still try to remote start and then maybe shut back down? Any help would be greatly appreciated.
Replies:
Posted By: enice
Date Posted: July 01, 2007 at 4:18 PM
Remove the WHITE/ blue wire to ground and try it
Posted By: captainzab
Date Posted: July 01, 2007 at 5:08 PM
leave your key in, in the "off" position
have your hood closed (or remove the hood wire)
ground your neutral safety wire (BLACK/ white) (make sure the wire is actually getting ground at the brain, the wire might be cut somewhere)
you shouldn't be using the WHITE/ blue activation input wire at all, cut it and tape it
reprogram tach
now try to remote start. you should atleast hear it try to start (or some clicking noise)
-------------
Note: You Always Dont Get What You Pay For.
Posted By: runforfuncc
Date Posted: July 01, 2007 at 6:01 PM
Tried both to no avail. :( The transmitter shows that I am sending but it shows that the alarm is recieving. Which is weird because the transmitter isnt making the 3 double chirps to tell me the alarm didnt recieve the transmission.
|