2005 silverado crew cab keysense
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95301
Printed Date: April 29, 2024 at 12:48 PM
Topic: 2005 silverado crew cab keysense
Posted By: blasito1973
Subject: 2005 silverado crew cab keysense
Date Posted: July 03, 2007 at 9:16 AM
i am installing a remote starter on a 2005 silverado crew cab i got a directed 1700g module the locks worked fine , but the door trigger output and the key sense are not working when i conected it the alarm didnt sensed the doors , i had no trouble with this i wired eaco of the four doors an they work , but the key sense is not working , first there are 4 green cables on the ignition harness one goes along another green into a conector behind the fuse box , and another goes into the conector behind the steering wheel (that is where the ligthest green cable is and where i got the key sense input conected), i tested in 3 of them and it dint work the truck does crank but does not keep runing , unles that when it is starting i get the key on the run position , and then i take the key out and it keeps runing without the key (but if i just leave the key in place it does not keep runing either ) and this is how i wired the interface red +12v , black ground ,BROWN / white i not conect , green /black lock alarm,violet/black lt green wire on ignition , blue/black unlok wire of alarm , RED / white n/c , green n/c, gray /black n/c , ligth blue unlock alarm , blue N/c , purple , pin 2 databus . and the remote starter like this all cables are the ones in the igition harnes +12 red , starter yellow , ignition 1 pink , igmition 2 white , acc orange , what do you think that the trouble will be , the same directed module on a 2003 silverado did start the truck but the locks didnt work , and it goes the other way in this one it does lock unlock but dont start please help
Replies:
Posted By: INSTALLER_MSS
Date Posted: July 03, 2007 at 1:17 PM
to make absolute sure which one is the keysense wire, take off the steering column shroud and use the wire going into the key cylinder.
-------------
"If a man made it, another can modify it...it just takes some thinking."
"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."
Posted By: KarTuneMan
Date Posted: July 03, 2007 at 9:02 PM
It's the light green in the top left hand corner of the plug (below the big fat red 12v wire
-------------
Posted By: blasito1973
Date Posted: July 04, 2007 at 4:22 PM
I have tried bought but still doesn`t keep running it just cranks but doesn`t stay running, it`s like the keysense cable it`s not connected
what i have tried to do is when the alarm stats the truck i get the key in the runing position and it sarts and keeps runing i take out the key and it still keeps runing this with the keysense cable conected or not , what can i do , thanks
Posted By: KarTuneMan
Date Posted: July 04, 2007 at 5:05 PM
Posted By: blasito1973
Date Posted: July 04, 2007 at 8:46 PM
as a mater of face i ordered a 457g but the guy that sold it to me said that he ran out of those and thet the newest version was the 1700g and that it was better , i used this same module on a 2003 truck and it did get the starter to work but not the door locks that truck was a 2003 silverado but it got in an accident before we could finish the install so we changed evrything to this truck and it does lock and unlock but it does not start tomorrow i am going do re install evrythin to see if i mised something
Posted By: INSTALLER_MSS
Date Posted: July 05, 2007 at 12:20 AM
i dont believe the key sense wire has anything to do with your problem. all the keysense wire basically is let the vehicle know there is a key still in the ignition cylinder and makes the door chime pretty much. that's about the jist of it's purpose. the passkey system is what makes it not start or allows it to run if it's the correct key.
-------------
"If a man made it, another can modify it...it just takes some thinking."
"If you ask questions, you're a fool for 5 minutes; if you don't, you're a fool for a lifetime."
Posted By: blasito1973
Date Posted: July 05, 2007 at 9:14 PM
so you think that the 1700g is the problem?
Posted By: blasito1973
Date Posted: July 06, 2007 at 9:29 PM
finaly after doing evry thing again the 1700g works great locks , un lock drivers side , un lock all , the remote starter works fine , i dont know if there was any cable that was making a false or something but it works great thank for all the help and ideas
|