Print Page | Close Window

Make a Starter Kill

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9535
Printed Date: May 14, 2025 at 8:34 PM


Topic: Make a Starter Kill

Posted By: PimpP495
Subject: Make a Starter Kill
Date Posted: February 14, 2003 at 11:36 PM

I have a 95 Z24 cavalier with a Prestige Platinum Alarm system, the alarm has everthing except a starter kill.  Is there any way I can make my own.....  I heard it isn't very difficult



Replies:

Posted By: zargon
Date Posted: February 15, 2003 at 10:28 AM
yes, get a relay , cut your starter wire in half its color should be yellow, conect one end of your starter wire to pin 30 connect the other to pin 87a, connect 12 volts topin 85 and connect your armed out put wire to pin 86, there you go!!!

-------------
zargon ruler of estranorth



Posted By: the12volt
Date Posted: February 15, 2003 at 10:36 AM

You can connect it as zargon described, but you should connect pin 85 to a 12V+ ignition source and not a constant 12V+ source. If you connect it to a constant 12V+ source, the coil of the relay will be energized for as long as the alarm is armed and will drain your battery in as little as two days or less.   https://www.the12volt.com/relays/page2.asp



-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window