adding locks to flush tonneau cover
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95436
Printed Date: May 28, 2024 at 8:15 PM
Topic: adding locks to flush tonneau cover
Posted By: xtreme05
Subject: adding locks to flush tonneau cover
Date Posted: July 08, 2007 at 8:09 AM
Hi I'm new to this forum and also to the car customizing world. I need some help with adding powered locks to my new flush tonneau cover for my truck.
My truck is a 2003 Chevy S10 with a Checkmate flush tonneau cover. My truck also has a shaved tailgate so my only option to secure my belongings in my truck bed is to install a powered door lock switch on the inside/underside of my tonneau cover.
I don't want to drill a hole through my new tonneau cover for manual locks.
I have a Viper 791xv 2 way/alarm/remote start system installed. I believe it has 2 AUX output switches.
Could you guys help me out on this project? I know a little about relay switches and stuff. I was wondering if you guys can point me out on a diagram. Tell me what parts I need.
I'm also trying to do this cheap. hehe
Thanks in advance!
Replies:
Posted By: xtreme05
Date Posted: July 09, 2007 at 6:16 AM
bump.
anybody got a clue on how to do this? somebody please help. i need to protect my things under my tonneau.
|