viper5900 sensor 1, 2 icon explain?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95459
Printed Date: April 25, 2024 at 2:20 PM
Topic: viper5900 sensor 1, 2 icon explain?
Posted By: sufferrar
Subject: viper5900 sensor 1, 2 icon explain?
Date Posted: July 09, 2007 at 9:46 AM
I have 2004 nissan wingroad with a viper 5900. I have installed the shock sensor and a 508d sensor. I have connected the 508 green wire to a relay and the relay output to the siren. So it is basically a chirping relay. The blue wire was just tied in to the blue of the shock sensor.
Here is what i want:
1 When the warn away from the shock sensor goes off i want icon 1 to be displayed.
2 When the warn away from the 508d sensor goes off i want icon 2 to be displayed.
3 If the full trigger of the shock sensor goes off i want icon 1 and the hammer to be displayed.
4 If the full trigger of the 508d sensor goes off i want icon 2 and the hammer to be displayed.
Given the way i have the 2 sensors connected can i get what i ask for ? or even pieces of it
-------------
"I'm So Loud It Hertz"
Replies:
Posted By: JWorm
Date Posted: July 09, 2007 at 9:54 AM
Blue and green of shock sensor to blue of shock sensor harness (just as it is from the factory)
Blue and green of 508D to green of shock sensor harness.
You don't need to have the 508d trigger a relay to trigger the siren. When the alarm sees those sensors triggered, it will chirp the siren.
Posted By: deathshadow
Date Posted: August 08, 2007 at 6:30 PM
So wait... You are splicing in the Blue & Green wire from the shock sensor harness (first and second stage trigger wires) into the DoubleGuard Shock Sensor harness (which plugs into the brain). In which case it will chirp if 508D outer zone is violated and it will set off the full siren if the second stage is tripped?
Wiring it this way will also display icon 2 and the hammer for the 508D?
|