2008 ford escape remote start wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95693
Printed Date: May 17, 2024 at 5:07 PM

Topic: 2008 ford escape remote start wiring

Posted By: AEDan1977
Subject: 2008 ford escape remote start wiring
Date Posted: July 17, 2007 at 10:34 PM

I was wondering if anybody has the wiring instructions for a 2008 Ford Escape 4x4 Limited Edition SUV to install a Python 990 Alarm and Remote Start. Everywhere I look I can only find the instructions for the 2007 model.

Thanks,
Dan

Replies:

Posted By: AEDan1977
Date Posted: July 17, 2007 at 11:25 PM

I am also assuming that I will need the DEI 556SW Bypass module for my car

Posted By: mikvot
Date Posted: July 18, 2007 at 5:33 PM

I put the wiring up a while back, here is the link. https://www.the12volt.com/installbay/forum_posts.asp?tid=93093&KW=08+escape

-------------

Posted By: AEDan1977
Date Posted: July 18, 2007 at 7:39 PM

I was wondering if anyone knows or can find the wiring instructions to install a DEI Python 990 Remote Start & Alarm w/ 530T Window Modules in a 2008 Ford Escape 4WD V6 Limited Edition. I logged into directtechs and they only have the information up to 2007. Also would the DEI 556SW be the correct bypass module to use and I know i would need both car keys to program it.

- Dan

Print Page | Close Window