Print Page | Close Window

window rollup module problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95702
Printed Date: April 18, 2024 at 11:06 PM


Topic: window rollup module problem

Posted By: keithhm
Subject: window rollup module problem
Date Posted: July 18, 2007 at 1:17 AM

Good Morning,

I am having trouble wiring the Window Rollup Module on an Alfa Romeo 164 Super V6 24v (1996). I connected the wires like I usually do and this time the Alfa Romeo 164 uses another negative wire to roll up the windows module I guess this its cos its 5-way Reverse Polarity.

The problem I am encountering is on the Driver's Window. The window switch came as factory standard with an Auto 1 Click Roll Up or Roll Down. The module I installed works on all 3 windows except the driver's. I  think that there is a relay or some sort or sensor to know when I have tapped once on the switch on just raising the window.

I must admit that I've never encountered such a problem, funny  thing rolling up 3 windows then the driver's side is left open ! Oh I almost forgot, the window module manages to roll the window up when there is the Ignition On but not on Off.

Your help and experties would much be appreciated,

Regards,

Keith



-------------
Alfa Romeo - Cuore Sportivo



Replies:

Posted By: nstaller36695
Date Posted: July 18, 2007 at 3:19 AM
you definitely need to check your connections and make sure theres no other modules between the switch and the window motor

-------------
the best part of a job is seeing the bumper get smaller over the horizon


Print Page | Close Window