Print Page | Close Window

manual for viper 320v alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95732
Printed Date: March 28, 2024 at 11:51 AM


Topic: manual for viper 320v alarm

Posted By: desh187
Subject: manual for viper 320v alarm
Date Posted: July 18, 2007 at 9:12 PM

Hi,
I have a Viper 320v alarm with no installation manual.There is a 12 pin main harness and a 7 pin(door lock)harness.
The 12 pin i can figure out but just the door lock harness is the one i need to know about.It is going to be installed on a vehicle with negative door locks so which wires do i use and which do i ground?
Any help will be appreciated.
Thanks..



Replies:

Posted By: swamprat323
Date Posted: July 18, 2007 at 10:17 PM
look in the down load section on this site its there




Posted By: desh187
Date Posted: July 19, 2007 at 4:11 PM
I went into the Viper web site and it only has the owners manual not the installation manual.




Posted By: howie ll
Date Posted: July 19, 2007 at 4:27 PM
Purple and PURPLE / black yo ground GREEN/ black to lock, blue/black to unlock, cut and insulate  (don't use)BROWN / black and WHITE/ black.




Posted By: swamprat323
Date Posted: July 19, 2007 at 4:40 PM
on this site the 12 volt has a down load section the guide is there




Posted By: the12volt
Date Posted: July 19, 2007 at 5:15 PM





Print Page | Close Window