Print Page | Close Window

remote starter, bypass, 2007 ranger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95774
Printed Date: May 18, 2024 at 12:51 PM


Topic: remote starter, bypass, 2007 ranger

Posted By: lapolvora
Subject: remote starter, bypass, 2007 ranger
Date Posted: July 20, 2007 at 11:41 AM

hi everybudy, exelent forum!

my question: i just bought a prostart  CT-3200, im planing to instal it on a ranger 2007 level II automatic trans, full equip(exept remote starter), now, i only wanna use the starter so do i need to connect de rest of the wires 12 ping plug??  (-)disarm, (-)rearm, (-)ext trigger input, (+)glow plug input, (-)ground when running, (-)neg parquing lights, (-)starter kill output, (-)unlock, (-)lock, (-)trunk, (-)aux 1 output.

it didnt came with any relay on the box,  do i need some? 

 wich bypass will do the job? many options. ( i was thinking on 1100F)

-- 1100F 1100FW DEI Ford PATS / Scurilock Interface Data

-- DEI 556S 556SW Ford Remote Start Interface Module

-- FORD PATS INTERFACE - 555FW

espc here: https://www.directedstore.com/cgi-bin...keywords= all

thanks guys




Replies:

Posted By: lapolvora
Date Posted: July 21, 2007 at 7:26 AM

any sugestion??

thanks




Posted By: mikvot
Date Posted: July 21, 2007 at 8:18 PM
The only wire i see you will have to hook up is the (-) ground while running....this will go to the bypass. I can't help you with the DEI bypass, since i don't use them. Check out https://bypasskits.fortinautoradio.com/vehicles/2007/ford/ranger/ ....I use the key-overide-sl2 for fords.

-------------



Posted By: lapolvora
Date Posted: July 23, 2007 at 2:36 PM
thanks


Print Page | Close Window