best bypass/data for 2004 acura tl?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95850
Printed Date: July 15, 2025 at 5:49 AM
Topic: best bypass/data for 2004 acura tl?
Posted By: peterubers
Subject: best bypass/data for 2004 acura tl?
Date Posted: July 23, 2007 at 7:41 PM
CAN-SL2? XK510? Thanks in advance (btw, I would prefer one unit to do imm. bypass AND doorlocks/triggers/tach/defroster but I don't mind having two units) ------------- The search function is your friend.
Replies:
Posted By: Velocity Motors
Date Posted: July 23, 2007 at 11:30 PM
I like the CAN-SL2 myself.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: peterubers
Date Posted: July 24, 2007 at 5:30 PM
With the CAN-SL2 -- do i also need a data transponder? How do you like the Honda-SL2? ------------- The search function is your friend.
Posted By: enice
Date Posted: July 24, 2007 at 9:54 PM
hands down. The Honda SL is a solid product and yes you do need that in addition to the cansl2. I prefer the Honda SL over the 556HW any day.
Posted By: Velocity Motors
Date Posted: July 24, 2007 at 11:45 PM
I agree, the Honda SL or SL2 is a much better module and yes you will need this along side the CANSL2 in order for the vehicle to remote start and control off the extra's.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: peterubers
Date Posted: July 25, 2007 at 12:57 PM
I have the CAN-SL ... is this good enough for the "extras?" or is the CAN-SL2 that much more superior in terms of reliablity and compatibility? (based on the manufacturer's listing, it just states that the CAN-SL2 has a two way communcation system?) ------------- The search function is your friend.
Posted By: enice
Date Posted: July 25, 2007 at 9:22 PM
Thats a port that makes the bypass connect directly to the aftermarket alarm(that supports it). its a D2D connection. There's cases where it would be connected as a W2W. Example, DEI systems do not have that connection in which case you would connect it wire to wire. You shouldn't have any issue in regards to it. Just make sure you solder all your connects and it should be done very fast. Good Luck
Posted By: peterubers
Date Posted: July 28, 2007 at 2:44 PM
got the Honda-SL2 and the CAN-SL .. thanks for the helps guys
-------------
The search function is your friend.
Posted By: swerks
Date Posted: July 29, 2007 at 11:09 AM
the xpresskits xk loader platforms are my choice.
xk 510 with hodl 2.03 software will do doorlocks security and transponder but will need to use a key. or you can use an xk01 with hodl2.03 for locks asnd an xk 05 with pkh3 software for the trans two modules but no key
-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta
|