what input wire is this for?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96041
Printed Date: April 26, 2024 at 8:42 PM

Topic: what input wire is this for?

Posted By: mziwt
Subject: what input wire is this for?
Date Posted: July 30, 2007 at 2:22 PM

posted_image

i've had this installed in my 97 maxima. it's one of those generic alarms without a specific name. this one was named "red x." i was wondering what this "white" input is for? Is it a "brake input"? if so, what would that do for me? this alarm actually locks the doors in 1 second when it's on ACC but i'd like it to lock after around 5 seconds instead of 1. otherwise, could i use this input so that my doors lock after i press on my brake?

Replies:

Posted By: b2reptile
Date Posted: July 30, 2007 at 2:45 PM

Not 100%, but my 1st thought was input for the park light circuit. A lot of alarms have a seperate input for this circuit, so it can be easily changed to a + or -.

Besides that idea, look in your car and see if there is a fuse on this wire, and/or if it is hooked to something already.

Posted By: mziwt
Date Posted: July 30, 2007 at 10:08 PM

it's not hooked up to anything, and it doesn't have a fuse.

Posted By: swamprat323
Date Posted: July 30, 2007 at 10:53 PM

that may be a postive input to trigger the alarm. arm the system wait a few sec and put 12 volts to it see if alarm goes off. does it have a descripiton for it in the manural for what u can use it for

Posted By: mziwt
Date Posted: July 31, 2007 at 12:35 AM

i'll try it this weekend. i can't exactly take my alarm apart this week. the manual says nothing about it. thanks!

Print Page | Close Window