hi i´m puting clifford martix 10.5x in my subaru impreza´99 and i can not find how i can use the door locks system.whits wire i can use or were the wires are.can some one help me plz??:( and sorry if the spelling is wrong here:oops:
Subaru door locks are 2 options if this is a rhd car.Put an acuator in the door an fire it with relays but the space is very limited and the acuator has to be installed upside down .Now if you are more experienced right side under console is a large black box cant miss it next to the ignition harness,about 9in by 7in that is where te door lock system is you can use a test light and test the 2 black relays on the curcuit board and you should get a -pulse unlock and lock just solder two fine wires and bring them outside of the box. Remember this is not for the unexperienced installer, be very careful when testing.
-------------
Jamaica home of the worlds fastest man.
yes thx i see the black box and what wire from the alarm do i use??
this is the wireing of the system
*NOTE: VIOLET and VIOLET/BLACK are common at fuse holder.
VIOLET* Unlock #87 Normally Open (Input)
BLUE/BLACK Unlock #30 Common (Output)
BROWN / BLACK Unlock #87a Normally Closed
VIOLET/BLACK* Lock #87 Normally Open (Input)
GREEN/ BLACK Lock #30 Common (Output)
WHITE/ BLACK Lock #87a Normally Closed
BLACK/ WHITE DomeLight Supervision relay Input #87
best regards
alli j
If it is a neg pulse trigger then you use the GREEN/ black for lock and the blue/black for unlock, with the violet wires going to ground.