strobes

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96194
Printed Date: July 07, 2025 at 10:34 PM

Topic: strobes

Posted By: gmontalvo8101
Subject: strobes
Date Posted: August 06, 2007 at 12:29 AM

im new to this mobile installation thing and i was wondering how would i go about connecting my sho-me kit to my alarm so they flash for the arm and disarm, when the alarm is triggered and also so i can have a seperate switch for the strobes so i can switch them on at a car show????? im lost.....i have them now to 2 switches....one for the main power on and off and one for the patterns(push button)?????

-------------
-MeMo

Replies:

Posted By: i am an idiot
Date Posted: August 11, 2007 at 9:35 PM

I am sure your alarm has a Light Flash Output. This is usually a positive output.

Print Page | Close Window