clifford matrix 10.5x installers guide
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96235
Printed Date: May 14, 2025 at 7:47 PM
Topic: clifford matrix 10.5x installers guide
Posted By: Gen6Civic
Subject: clifford matrix 10.5x installers guide
Date Posted: August 07, 2007 at 6:49 PM
I'm not sure if this is the right place to post this but i'm trying to download the guide for the matrix 10.5x at this location:
https://www.the12volt.com/installbay/file.asp?ID=551
but it doesn't let me. am I doing something wrong?
I have downloaded the manual for the 10.5 but I need the manual for the 10.5x version of this alarm. the only difference in the link is the ID which is 550 and not 551. can anyone help? thanks!
------------- watch wut u do...
Replies:
Posted By: the12volt
Date Posted: August 07, 2007 at 7:06 PM
No, you're not doing anything wrong. The file is MIA and has been removed from the database. Hopefully one of our members will add it again. ------------- the12volt • Support the12volt.com
Posted By: Gen6Civic
Date Posted: August 07, 2007 at 7:22 PM
thanks for the reply. I found the guide myself somewhere else and uploaded it to the site.
------------- watch wut u do...
Posted By: the12volt
Date Posted: August 07, 2007 at 7:52 PM
Thanks Gen6Civic, it's been added. ------------- the12volt • Support the12volt.com
Posted By: the12volt
Date Posted: August 07, 2007 at 7:54 PM
Posted By: Gen6Civic
Date Posted: August 07, 2007 at 10:28 PM
after looking at the guide, i DO have a question about the module. where is the piezo sensor located? does it come with one in the package? i'm looking at the wiring diagram and i see a place for sensor 2 and sensor 3. based on this guide, it doesn't seem to come with a steering wheel sensor like other alarms.
p.s. the reason why i'm asking is because i've had to take my car to an installer but they did a bad job of rewiring and i noticed a sensor that wasn't plugged in and it may have been from the old alarm i had before. any help would be appreciated. :)
------------- watch wut u do...
|