keyless entry door lock problem
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96241
Printed Date: May 14, 2025 at 1:56 PM
Topic: keyless entry door lock problem
Posted By: brian_mcenulty
Subject: keyless entry door lock problem
Date Posted: August 07, 2007 at 9:26 PM
Hey guys I installed an Audiovox APS996a alarm in my truck awhile ago and it works fine but my keyless entry recently stopped working. My door locks work just fine with the buttons on the inside of the truck but don't work at all with the key fob. I looked at my fuses and it turned out that my door lock fuse was blown so I replaced it but it blows instantly when I try using the key fob. Even when the fuse is blown the locks work fine with the trucks buttons on the inside. My truck is a 1999 ford f150 and I wired up the door locks to the alarm using 2 relays with the 5 wire setup, 1 relay for unlock 1 for lock. I'm guessing there's just a short somewhere in the wires from the alarm causing the fuse to blow? Any ideas would be helpful thanks
Replies:
Posted By: swerks
Date Posted: August 07, 2007 at 9:34 PM
check all of your wiring for the doorlocks check the relays as well
-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta
|