Window Roll up Factory alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=963
Printed Date: July 19, 2025 at 9:06 AM

Topic: Window Roll up Factory alarm

Posted By: itr778
Subject: Window Roll up Factory alarm
Date Posted: May 26, 2002 at 10:27 PM

I was wondering if anybody did a Window Roll up on a Factory Alarm on a Acura Integra 2001?? I"m not sure which wire to tap into for the negative pulse..

thanks..

Replies:

Posted By: Big Dog
Date Posted: May 29, 2002 at 2:37 PM

Hey itr778,

Don't use the switch wires for window roll-up because there is no way to time the duration which would depend on how high or low the window is. Instead use a window roll-up module which senses when the window is up all the way and of course disconnects the current to the motors. This is much safer also if an arm is in the way.

The colors for the drivers motor are RED / blue and RED / yellow

front passenger are blue / YELLOW and blue/green

left rear are green and GREEN/ YELLOW

right rear are YELLOW /GREEN and yellow

all these can be found in drivers door.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: itr778
Date Posted: May 30, 2002 at 5:54 PM

I have a window module.. I know the colors of the wires to tap into.. i just need the wire to tap into for the negative pulse which tirggers the window module.. '

thanks

Big DOG>..

Posted By: Big Dog
Date Posted: June 03, 2002 at 1:19 PM

Hey itr778,

In that case what brand is your window module? Most of them require an "ARMED" pulse from the brain, it could be the same wire that you're using for your stater kill.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.