Print Page | Close Window

audiovox alarm lost two way feature

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96354
Printed Date: July 12, 2025 at 5:40 PM


Topic: audiovox alarm lost two way feature

Posted By: cleanz32
Subject: audiovox alarm lost two way feature
Date Posted: August 12, 2007 at 7:41 PM

My audiovox two-way alarm has lost its two-way feature. The key fob works but doesnt beep or change the display. Just the other day I removed the radio and the two-way feature worked for the day but now it doesnt. I thought something might be loose but everything seems to be ok. Does anyone know what I should check for? I have electrical expierence but nothing with alarms so I feel lost on this one.




Replies:

Posted By: fkelsey
Date Posted: August 12, 2007 at 7:45 PM
Check the entire antenna run and make sure you did not knick it. The remote starts I use have a five wire ribbon and I cut one of the smaller wires once and everything but the pager function worked.



Posted By: cleanz32
Date Posted: August 12, 2007 at 7:49 PM
Im not sure what the antenna run is but i'm guessing that is whats on my windshield? I had best buy do the install any they put that on the top left of the windshield and I assumed it was for the temperature. I'll check that because I was in that area removing the radar detector I had hardwired. 



Posted By: fkelsey
Date Posted: August 13, 2007 at 8:23 AM
Yeah I'm sorry that is the wire going from your antenna to your remote start. Since you were in the area I bet that is your problem.


Print Page | Close Window