Print Page | Close Window

1999 subaru foerster viper alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96406
Printed Date: May 10, 2024 at 4:32 AM


Topic: 1999 subaru foerster viper alarm

Posted By: meljaydyl
Subject: 1999 subaru foerster viper alarm
Date Posted: August 14, 2007 at 9:21 PM

Hello
need Install instructions to install Viper alarm with remote starter on a 1999 Subaru Forester.
Schematics and location of wires.


-------------
Salty X



Replies:

Posted By: meljaydyl
Date Posted: August 16, 2007 at 9:43 PM
Forgot to mention
It is a viper 560XV.
Need to know where all these wires should go
Do I need all these outputs?
Blue and white wire (activation input) where does this go?

-------------
Salty X



Posted By: JWorm
Date Posted: August 17, 2007 at 9:34 AM
You need to search this site more:
99 Forester

There will be a lot of wires on the 560xv that you won't need. The WHITE/ blue activation wire will not be used. Cut it short, and tape it up. The 2nd ignition pink/white wire will also not be used.

On that diagram, you will use the 'door lock' and 'door unlock' wires. The driver's lock and unlock and passenger unlock wires will not be used.


Print Page | Close Window