Print Page | Close Window

ALPINE 8040 ALARM

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9650
Printed Date: October 31, 2024 at 5:45 PM


Topic: ALPINE 8040 ALARM

Posted By: michaelc
Subject: ALPINE 8040 ALARM
Date Posted: February 17, 2003 at 1:31 PM

Does anyone have a user manual for an Alpine 8040 alarm??



Replies:

Posted By: Velocity Motors
Date Posted: February 17, 2003 at 1:43 PM
What do you need from it exactly ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: michaelc
Date Posted: February 17, 2003 at 1:44 PM
well.. was wondering what the second button does and how if any settings from remote...




Posted By: Velocity Motors
Date Posted: February 17, 2003 at 2:07 PM
The second button on the 8440 remote is for the AUX channel. This channel outputs a (-) pulse for a trunk release or anything that requires a (-) pulse to operate. It is the Yeelow/Green wire on the main harness of the 8040 CPU.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: michaelc
Date Posted: February 17, 2003 at 2:10 PM
ok.. does the LED need a resistor on it to work?




Posted By: Velocity Motors
Date Posted: February 17, 2003 at 2:16 PM
No it does not. It's all controlled by the CPU.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA





Print Page | Close Window