2006 corolla remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96509
Printed Date: July 17, 2025 at 2:39 PM

Topic: 2006 corolla remote

Posted By: opj38
Subject: 2006 corolla remote
Date Posted: August 19, 2007 at 6:40 PM

I am trying to install a remote in this car. I have the wiring diagrams, but need to know how to bypass the key transponder? do i use the 556UW with a key or is there another way, and also the power door locks, which wire? seen so many topics on how to , need the final way do to it. Thanks in advance.

Replies:

Posted By: peterubers
Date Posted: August 19, 2007 at 7:57 PM

You can use the XK05 from www.bypasskits.com or www.autotoys.com and you won't have to give up a key (I prefer this route).

Power Unlock		BLUE / YELLOW		(-)		DRIVER KICK
	PowerLock		GREEN		(-)		DRIVER KICK

Unlock = pin #6

Lock = PIN #7 & #19 - YOU MUST DIODE ISOLATE THE UNLOCK PULSE FROM THE ALARM UNIT TO AVOID FEEDBACK.

-------------
The search function is your friend.

Posted By: peterubers
Date Posted: August 19, 2007 at 7:59 PM

Also have this info for the lock/unlock:

POWER LOCK	BLUE/WHITE (TYPE B)	@ WHITE PLUG , DRIVER KICK PANEL
POWER UNLOCK	BLUE (TYPE B)	@ WHITE PLUG , DRIVER KICK PANEL

I would personally try these wires first, and if no go.. try the above set of wires.

-------------
The search function is your friend.

Print Page | Close Window