07 nissan 350z door lock interface?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96563
Printed Date: May 13, 2025 at 4:02 AM

Topic: 07 nissan 350z door lock interface?

Posted By: dmw5678
Subject: 07 nissan 350z door lock interface?
Date Posted: August 21, 2007 at 10:38 PM

Is it possible to hook the Data Bus interface for Nissan that unlock/look the doors into the CAN-L at the ODBII connector vs the kick panel

350z install

Replies:

Posted By: spookiestylez
Date Posted: August 21, 2007 at 10:45 PM

why not go into the driver door for the locks. Very straight forward

-------------
RTFM

Posted By: swerks
Date Posted: August 21, 2007 at 10:49 PM

why not get them at the bcm they are there but there are no wires i tin the tips and use a little glue to keep them in. its never failed me,
they are neg pulses double unlock

-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta

Posted By: dmw5678
Date Posted: August 21, 2007 at 11:30 PM

I have a Data Bus Interface I would like to use to minimize wire conections to BCM/other. I would like to avoid going into the doors if poosible and the BCM CAL-L & CAN H points are my second option. The ODBII connector seems eaiser to get at.

2007 350z - Viper 5900 Install

Posted By: KPierson
Date Posted: August 22, 2007 at 9:11 AM

Go in to the doors for the door locks and then hook up remote window up and remote widow down.

Otherwise, you will lose the remote window down capability that the car has from the factory.

-------------
Kevin Pierson

Posted By: caralarmtec
Date Posted: August 22, 2007 at 12:00 PM

You can use a IM02 wih firmware NISSDL from Omega that will interface the door locks from the data port.

-------------
17 Year Veteran Tech

Print Page | Close Window